How To Create Dns In Windows Server 2012

This article is dedicated to the Domain Name System or DNS server which is the heart of whatsoever enterprise network. DNS is generally used to resolve host names to IP addresses and IP addresses to host names.

This tutorial focuses on:

1. Installing DNS server role
2. Configuring forward lookup zone
3. Configuring reverse lookup zone
4. Adding a host record in forrard lookup zone
5. Adding a PTR record in reverse lookup zone

Prerequisites

For DNS server to exist configured, y'all should meet the post-obit requirements:

1. Administrator business relationship has strong password
2. At least one static IP is configured
3. Electric current security updates from Windows Update are installed
4. Firewall is turned off

Installing DNS Server Role

Step ane: From job bar, open server manager dashboard

Effigy 1

Step two: Read the notes and meet the prerequisites. Click Next when yous are done

Figure 2

Step 3: Choose Role-based or characteristic-based installation and click Next

Figure three

Stride four: Select the destination server from server puddle on which you want to configure DNS and click Adjacent

Figure 4

Footstep 5: Choose DNS Server from server roles. When prompted to install additional necessary features forth with DNS server, click Add together Features

Figure 5

Footstep 6: Click Next

Effigy 6

Stride seven: Keep default selections and click Next

Effigy vii

Step 8: Read the important notes and click Next

Figure 8

Step 9: Click Install. Expect for a moment before DNS role is installed

Figure nine

Configuring Forward Wait Up Zone

Footstep 1: Open server manager dashboard, and then open tools. Scroll to DNS and click it

Figure 10

Step 2: Correct-click Frontwards Lookup Zones and click New Zone

Figure 11

Footstep 3: Click Side by side

Figure 12

Step 4: Provide the zone name and click Next

Figure thirteen

Step 5: Choose Create a new file with this file proper name and click Next

Figure 14

Step half-dozen: Choose Do non let dynamic updates and click Next

Figure fifteen

Stride 7: Click Finish to successfully create the new zone

Figure 16

Configuring Reverse Look Up Zone

Footstep 1: Open server manager from job bar and click on Tools. Scroll to DNS and and then click on it

Figure 17

Pace ii: Right-click Contrary Lookup Zones then click New Zone

Figure xviii

Footstep 3: Click Next

Effigy 19

Step iv: Choose Principal zone and click Adjacent

Figure 20

Pace v: Cull IPv4 Opposite Lookup Zone and click Side by side

Figure 21

Step 6: Provide network ID and click Next

Figure 22

Step vii: Choose Create a new file with this file name: and click Next

Figure 23

Step 8: Choose Exercise not permit dynamic updates and click Side by side

Figure 24

Step 9: Click Finish to end the magician

Figure 25

Calculation a New Host Record in Forward Look Up Zone

Stride one: Locate the zone in forward lookup zones and right-click on it. Scroll to New Host (A or AAAA) and click on information technology

Effigy 26

Footstep 2: Provide the proper name and click Add together Host

Figure 27

Pace iii: Click OK and this new host record volition be visible in zone

Effigy 28

Adding a New PTR Record in Forward Look Up Zone

Step 1: Right-click the desired reverse lookup zone. Roll to New Arrow (PTR)

Figure 29

Step 2: Provide host name and click OK

Effigy thirty

Conclusion

In this article, I have showed the steps which are used to configure DNS server on Windows Server 2012 R2. Yous can test this configuration past taking a DNS client and pointing its DNS setting to this server. You should be able to resolve the host you but created.

Source: https://www.faqforge.com/windows/configure-dns-windows-server-2012-r2-2/

Posted by: stewartowereve.blogspot.com

Share this post